Showing posts with label Wind Turbines. Show all posts
Showing posts with label Wind Turbines. Show all posts

Monday, January 12, 2009

Southwest Windpower Whisper 100 Wind Turbine -- Model 44447

Description: 


Southwest Windpower Whisper 100 Wind Turbine -- Model 44447

Southwest Windpower Whisper 100 Wind Turbine -- Model 44447

Ultraquiet wind turbine is designed to operate in a site with medium to high wind speed averages of 12 MPH and greater. Provides 100+ kWh per month (3.4 kWh per day) in a 12 MPH average wind. The Whisper 100 is one of the quietest wind turbines ever tested by the National Renewable Energy Labs. Ideal for cabins, 12V battery charging, remote power and backup power. Adjusts from 1248V DC and features overspeed protection. U.S.A. Application: Cabins, Volts: 1248V DC, Watts: 900 at 28 MPH, Blade Material: Polypro/carbon glass reinforced blades, Speed (MPH): 120, Material: Cast aluminum body, Rotor Size (ft.): 7, Overspeed/Overcrank Shutdown: Patented side furling *Rated power: 900 Watts of power at 28 MPH wind speed *Delivers 100 kWh per month (3.4 kWh per day) in a 12 MPH average wind *Works in winds as low as 7.5 MPH *Adjusts from 1248V DC in minutes *Includes controller to protect turbine and storage batteries *Sidefurling overspeed protection turns alternator & blades out of high winds without cutting power output *Survival wind speed: 120 mph *7ft. dia. rotor has polypro/carbon glass reinforced blades *Alternator has cast aluminum body *4bearing spindle for long life *Bronze bushing and largediameter furling pin for smooth furling action *Uses 2.5in. Schedule 40 mount *Installs in a few hours with no welding or concrete work required *1year limited warranty *U.S.A. *Model 44447

extvideo: 

allvoices

Sunday, December 21, 2008

A look at Swift Wind Turbines

Wind turbines could feasibly provide a lot of electricity to the world and building integrated wind turbines is an interesting model to use. A building integrated wind turbine is mounted on e.g. a rooftop. Roofs often have better wind than on the ground, but as I noted in the earlier article there is a bit of controversy in that earlier designs transmitted vibration to the building causing damage. However there are several new designs which have better behavior.

The Swift Wind turbine is one of these. It is said to be quiet, vibration free, simple to install, zoning compliant, etc.

The design includes mounting brackets that incorporate damping systems specifically designed to absorb a wide range of frequencies. The design includes an outer ring diffuser which minimizes turbine noise by preventing turbulence vortices at the blade tip.

The Swift Wind Turbine was developed by Renewable Devices in Scotland. The Swift turbine is mounted on an aluminum mast with a minimum blade-roof clearance of approximately 2 feet. It is usually mounted at the highest point of a roof, in a position which benefits from maximum prevailing wind, but it will work effectively in almost any location. The Swift is designed to be both aesthetically pleasing and quiet.

Rated power output: 1.5kW @ 14 m/s; Annual Power Supplied: up to 2000 kWh; Electric power: 240VAC, 60Hz output voltage; Noise: less than 35 decibels for all wind speeds

External Media

allvoices

Tuesday, September 11, 2007

Storing wind power for a calm day

One common critique of wind power is it's only available when the wind is blowing. Often hot days have no wind, hence the power isn't available when it's most needed. And wind is gusty, the strongest winds might be happening at times other than when the power is needed. While this point is thrown out to say that wind power is no good, what it means is to use wind power means finding a way to store electricity generated when the wind is strong and releasing it when its needed later.

A strategy that's used in California, that could be used for electricity from wind power, is to pump water uphill. Since electricity rates are low at night there's an economic argument to make that one can use night-time electricity to pump water to an uphill reservoir, and then release that water through hydroelectric facilities during the day when electricity rates are higher. Indeed this does happen in California and probably elsewhere.

Another strategy might be to use excess electricity to electrolyze water and extract hydrogen. Store the hydrogen in a tank, then release it later to generate electricity. This can be done either with fuel cells or by burning in a turbine.

Utility will use batteries to store wind power covers storing the electricity in batteries. American Electric Power is an electric utility operating in Ohio, Virginia, West Virginia, Kentucky, Tennessee, Indiana, Oklohoma, Arkansas, Louisiana, and Texas.

AEP to deploy additional large-scale batteries on distribution grid is their press release. The battery technology uses a sodium sulfur chemistry and goes under the trademark NAS ®. The press release seems to be saying the batteries will be used similarly to a peaker plant, which is a strategy where a "small" natural gas power plant can be fired up during the day, during peak demand times, to handle peak loads, hence the name "peaker". They are also including wind power in their generating network and due to the gusty effects of wind will also see peak generating times. They describe the size of these installations as "1 megawatt" or "11 megawatts" but that is a nonsensical measure for battery packs. "Megawatt" is a measure of current at a given moment, what's important here is how long can the plant sustain that power delivery. Can it only provide 11 megawatts for 1 second? Or over an hour? Or for a full day? Inquiring minds want to know.

The reasoning in the article goes like so:

They can charge at night, when the wind is strong but prices are low, and give the electricity back the next afternoon, when there is hardly any wind but power prices are many times higher, company officials said. That strategy would reduce the amount of power generated from inefficient peak-demand units.

The batteries can also insert energy into the grid during brief voltage drops, reducing the chance of a blackout and stabilizing the grid for all users. They may also delay or eliminate the need for transmission upgrades in some areas, the company said.

This appears to me to match the reasoning of peaker power plants, not wind power. But as I said earlier wind generation has its own peak times which don't necessarily match peak times of customer demand, so this gives the utility some extra flexibility to adopt wind power.

AEP Commissions First U.S. Demonstration of the NAS Battery describes the battery technology, but again does not describe the actual size of the systems they are installing. The page has a picture looking like a relatively small installation you could see on a concrete pad in a parking lot. The battery technology is said to come from Tokyo Electric Power Company (TEPCO) and NGK Insulators, Ltd., (NGK) and elsewhere it says Ford Motors originally discovered the battery chemistry, which makes this yet another example of an American company skipping over developing some technology only to allow foreign companies to exploit it.

Saving wind power for later is another technique developed by General Compression to use a wind turbine to compress air, and release the compressed air through another turbine when electricity is required. They sell these as combined units.

It seems the critical item in all the different strategies for storing wind power, is the cost of the storage system. We're facing the same issue in electric vehicles where the best batteries to store electricity are also expensive.


allvoices

Wednesday, March 28, 2007

10,000 kW Electrical Power Generation in Your Backyard

Want to get off the grid? the Electric grid that is. The QR5, from U.K.-based Quietrevolution, is a residential-scale wind turbine that generates enough electricity to power a standard U.S. home or a small office. It also looks like a piece of wind-powered sculpture. Unlike the shape of a conventional windmill propeller, it’s a Vertical-axis wind turbine.

Prior coverage of vertical axis wind turbines: Vertical axis versus horizontal axis wind turbines

The maker: quietrevolution

Article Reference: 

allvoices

quietrevolution

Description: 

Makers of a vertical axis wind turbine that's meant for use within urban settings. The quietrevolution (QR) was designed in response to increasing demand for wind turbines that work well in the urban environment, where wind speeds are lower and wind directions change frequently. The elegant helical (twisted) design of QR ensures a robust performance even in turbulent winds. It is also responsible for virtually eliminating all noise and vibration. At five metres high and three metres in diameter, it is compact and easy to integrate.


allvoices

Tuesday, January 9, 2007

Wind Power In Stormy Waters

Wind Power In Stormy Waters is a series of pictures documenting the process for installing offshore wind farms, and the huge wind turbines that are used.


allvoices

Monday, August 28, 2006

Chispito Wind Generator

Description: 

The Chispito Wind Generator was designed to be simple and efficient with fast and easy construction. There are no limits to what you can do with wind power. There is nothing more rewarding and empowering than making a wind powered generator from scrap materials. Most of the tools and materials in this manual can be found in your local hardware shop or junk pile.

This page gives construction plans to build an inexpensive wind generator.


allvoices

Saturday, August 12, 2006

Renewable Devices

Description: 

They design a small scale wind turbine that can be easily integrated with buildings and fit nicely in an urban setting. They also offer renewable energy design and consultation services.


allvoices

Windsave

Description: 

Windsave Ltd. was formed in January 2002 to develop a Commercial and Domestic small wind turbine generator system using low wind speeds to create electricity while avoiding the use of batteries. The Windsave system is wall mounted and incorporates our unique Plug'n'Save™ inverter that delivers the electricity synchronised to the grid supply into the property on the consumer side of the meter, reducing consumption and cost of electricity from the Grid.

The Windsave® product has been created to provide an environmentally-friendly, low-cost source of sustainable energy and providing an opportunity for every property in Britain to play a part in "the Green Revolution". Many people have the desire to protect the environment, but our challenge has been to turn that desire into action. By developing micro-wind generation technology, our towns, cities and rural communities now have the potential to become important contributors to the country's overall energy requirements, rather than just mere consumers.


allvoices

Bergey Windpower

Description: 

Bergey Windpower is the world’s leading supplier of small wind turbines. With installations in all 50 U.S. States and more than 90 countries, and an international network of ~ 600 dealers, we have the products and experience to put the wind to work for you.

At Bergey Windpower, we take pride in offering advanced-technology products that let homeowners and businesses generate their own clean power and even spin their utility meter backwards. Our turbines are also used for off-grid homes, for rural electrification, and to boost the performance of solar electric systems.


allvoices

Aerotecture, Ltd.

Description: 

Wind turbine technology that is affordable and designed for elegance and safety to wildlife. Rather than a propeller on a stick, their turbine is a thing spinning within a cylinder. The turbines can be mounted on existing buildings - vertically, horizontally, diagonally - and are designed to partner perfectly with other renewable energy technology.


allvoices

Breezy 5.5 - A Reliable 5500 Watt Homebuilt Wind Turbine Generator

Description: 

A set of plans describing how to build a wind turbine. The size is suitable for powering a home or farm.

  • Built With Off-the-Shelf Components
  • Rugged Efficient Blade Design
  • Requires No Batteries, No Inverter
  • Grid Ready!!
  • Easy to Build and Maintain
  • 100 Pages - Step by Step Details
  • 47 Diagrams
  • 84 Pictures
  • Economics and Breezy 5.5
  • Theory of Operation


allvoices

Tuesday, August 8, 2006

REpower 5M - Massive 5 megawatt wind turbines

Description: 

The worldwide largest wind energy converter will be developed by REpower. The development is co-financed by the European Union and the German state Schleswig-Holstein. Within the frame of the European project "5MW Innovative Wind Turbine Suitable for on Land and Offshore Installations".


allvoices